How to Install Windows 10

H teaches you how to install Windows 10 on your PC. To do this, you need to hold down a key when Windows starts, which will launch a menu that allows you to start the computer from a USB drive or a CD/DVD with the Windows 10 installer. The following instructions show a clean installation and no programs or data will be retained. If you want to perform an update installation (only from Windows 7, 8 or 8.1), when you follow the instructions for the Windows 10 installation tool below, the update will start when Windows is already running. All programs not supported by Windows 10 may be ignored, otherwise these programs will exist and all files will remain.

  1. Make sure that the Windows 10 installation media is connected. In order to install Windows 10, the Windows 10 installation file must be loaded onto a disc or flash drive, and the disc or flash drive must be inserted into the computer. If you have not downloaded the Windows 10 installation tool, please follow the instructions on this Microsoft support page:
Image titled Install Windows 10 Step 2
  1. Open the start menu. Click the Windows icon in the lower left corner of the screen, or press the ⊞Win key.
Image titled Install Windows 10 Step 3
  1. Click the power icon. This is the circle with a line through its top that’s in the bottom-left corner of the Start window.
Image titled Install Windows 10 Step 4
  1. Click Restart. In the pop-up menu above the power icon. Doing so will restart the computer.
  2. Press and hold Del or F2 to enter the settings. This key may also be another key. Most computers will display a message when starting up, prompting “press [key] to enter settings” or similar. Therefore, look for this message when the computer restarts to confirm that this key should be pressed To access the BIOS. Please check the computer’s manual or online support page to confirm the computer’s BIOS key.
Image titled Install Windows 10 Step 6
  1. 6 Navigate to the Boot tab. You’ll use the arrow keys to select it.
    • The Boot tab may instead say Boot Options, depending on your computer’s manufacturer.
Image titled Install Windows 10 Step 7
  1. Select the device you want to start from. You can choose two options here: For USB flash drives, select the “Removable Device” option. For CD installation, please select the CD-ROM drive option. 8 Press the + key until the first startup option. Once the removable device or CD-ROM drive is at the top of the list, the computer will select your option as the default boot option. On some computers, you can press one of the function keys (such as F5) to navigate the top of the menu. The key will be listed on the right side of the screen.
  2. Save Settings. You should see a key prompt (such as F10) related to “Save and Exit” at the bottom of the screen; press it to save your settings and restart your computer. You may need to press ↵Enter to confirm the change. 10Wait for the computer to restart. Once the computer has finished restarting, you will see a window here with your geographic data. Now you can start to set up the Windows 10 installation.

Part 2 Installing

  1. When prompted, click Next. If needed, you can also change the options on this page (for example, set the language) before proceeding. 2 Click Install Now. In the middle of the window. 3Enter the Windows 10 key and click “Next”. If you don’t have a Windows 10 key, click “Skip” in the lower right corner of the screen. 4 Click the “Accept” box, and then click “Next”. This means that you accept the terms of use.
  2. Click Upgrade. It’s at the top of “Which type of installation do you want?” window. This option will install Windows 10 while preserving files, applications, and settings. You can click “Customize” to clean install Windows 10 on your computer. Doing so will prompt you to select the partition to format before proceeding. 6Wait for Windows 10 to install. This process may take from half an hour to several hours, depending on the previous operating system and processing speed of the computer. If you are prompted to press a key to boot from the CD, do not press any keys.
  3. Follow the setup instructions on the screen. After installing Windows 10 on your computer, you will be able to customize its settings (for example, your region, your preferred language, location settings, etc.). After completing this process, you will be taken to the desktop of your computer. You can also click Quick Settings to set up Windows 10 with recommended settings.

How To Install FREE Avira Antivirus In Windows 10 Easliy (Step by Step)

First download Avira Free Antivirus.

Here are step-by-step installation instructions on how to download and install Avira Free Antivirus.

Step 1: Open the downloaded installation file.

Step 2: Click the power button if it appears as a security window

Step 3: Click Next in the Avira Free Antivirus opening window

Step 4: Select a language (the default is English) and click Next. Wait until the download is complete.

Step 5: Select Quick Installation Types (Recommended), check “I agree to the end user license agreement” and click Next

Step 6: You can keep the Internet protection option on or uncheck it, but it is best to enable Internet protection (SearchFree toolbar). Tap “Next

Step 7: If you added the SearchFree toolbar option, enable it by clicking Run at the bottom of the browser. You will see Internet protection, browser security, blocked options added to the browser. You can enable pop-up blocker, cookie blocker, etc. by activating browser security.

Step 8. Close the browser and open the Avira Control Center from the desktop. Here is the final user interface of Avira Free Antivirus and you enable real-time protection, scanning system, upgrade, web protection and many others.